Isihlalo Esinokutshintshwa I-CF8M Disc Lug Butterfly Valve DN250 PN10 10Inch

Yenzelwe ukulawula ukuhamba kwamanzi kwiinkqubo zemibhobho yemizi-mveliso.

√ Amanzi kunye namanzi amdaka: Ifanelekile kwiinkqubo zamanzi okusela, amanzi amdaka, okanye zokunkcenkceshela (ezinesihlalo se-EPDM).
√Ukucubungula iikhemikhali: Idiski yeCF8M kunye nesiphatho sesihlalo sePTFE seekhemikhali ezirhabaxa.
√Ukutya neZiseloIipropati zococeko zeCF8M zenza ukuba ifaneleke ukusetyenziswa ngokwezinga lokutya.
√I-HVAC kunye noKhuselo loMlilo: Ulawulo luhamba kwiinkqubo zokufudumeza/zokupholisa okanye kwiinkqubo zokutshiza.
√Ulwandle kunye nePetrochemical: Iyamelana nokugqwala emanzini olwandle okanye kwiindawo ezine-hydrocarbon.

Ubungakanani:2”-48”/DN50-DN1200

Uvavanyo loxinzelelo:PN10/16, JIS5K/10K, 150LB

Iwaranti:Iinyanga ezili-18

Igama lebrand:Ivalvu ye-ZFA

Inkonzo:I-OEM

Sithumelele i-imeyile

Iinkcukacha zeMveliso

Ubungakanani kunye noVavanyo loXinzelelo kunye noMgangatho
Ubungakanani	DN40-DN1200
Uvavanyo loxinzelelo	PN10, PN16, CL150, JIS 5K, JIS 10K
Ubuso ngobuso I-STD	I-API609, BS5155, DIN3202, ISO5752
Uqhagamshelo lwe-STD	PN6, PN10, PN16, PN25, 150LB, JIS5K, 10K, 16K, GOST33259
I-Flange Ephezulu STD	I-ISO 5211

Izinto eziphathekayo
Umzimba	Intsimbi Ephosiweyo (GG25), Intsimbi Ephosiweyo (GGG40/50), Intsimbi Yekhabhoni (WCB A216), Intsimbi Engagqwaliyo (SS304/SS316/SS304L/SS316L), Intsimbi Engagqwaliyo Ephindwe Kabini (2507/1.4529), Ibronzi, I-Aluminiyam Alloy
Idiski	I-DI+Ni, Intsimbi yeCarbon (WCB A216), Intsimbi Engagqwaliyo (SS304/SS316/SS304L/SS316L), Intsimbi Engagqwaliyo Ephindwe Kabini (2507/1.4529), Ibronzi, I-DI/WCB/SS efakwe i-PTFE
Isiqu/Umgodi	I-SS416, i-SS431, i-SS304, i-SS316, i-Duplex Stainless Steel, i-Monel
Isihlalo	I-EPDM
Ukugquma ngezihlahla	I-PTFE, iBronze
Indandatho ye-O	I-NBR, i-EPDM, i-FKM
I-Actuator	I-Hand Lever, Ibhokisi yeGiya, I-Electric Actuator, I-Pneumatic Actuator

Umboniso weMveliso

izihlalo ezithambileyo ezineevalvu zebhabhathane ezigcweleyo

Inzuzo yeMveliso

Ukutywina: Isihlalo esinokutshintshwa siqinisekisa ukuvalwa okuqinileyo, okubalulekileyo ekwahlukaniseni ukuhamba kwamanzi okanye ukuthintela ukuvuza.

Uyilo lwesihlalo esinokutshintshwa: Ivumela ukuba isihlalo sitshintshwe ngaphandle kokususa ivalvu kumbhobho, nto leyo enciphisa ixesha lokungasebenzi kunye neendleko zokulungisa. Ingaqinisekisa ukuvalwa okuqinileyo kwidiski, ithintele ukuvuza xa ivalvu ivaliwe.

Idiski yeCF8M: I-CF8M yintsimbi engagqwaliyo eyenziwe ngesinyithi (elingana nentsimbi engagqwali engama-316), inika ukumelana nokugqwala okugqwesileyo, ukuqina, kunye nokufaneleka kwiindawo ezinobungozi.

Uyilo lweeLug: Ivalvu inemixokelelwane enemisonto, nto leyo eyenza ukuba ikwazi ukubotshelelwa phakathi kweeflanges okanye isetyenziswe njengevalvu yokuphela komgca eneflange enye kuphela. Olu yilo luxhasa ukufakwa nokususwa okulula.

I-DN250 (Ububanzi obuqhelekileyo): Ilingana nevalvu eyi-intshi ezili-10, efanelekileyo kwiipayipi ezinkulu.

I-PN10 (Igama loxinzelelo): Ilinganiswe ngoxinzelelo oluphezulu lwe-10 bar (malunga ne-145 psi), ifanelekile kwiinkqubo zoxinzelelo oluphantsi ukuya koluphakathi.

Umsebenzi: Ingasetyenziswa ngesandla (nge-lever okanye igiya) okanye ngee-actuators (zombane okanye ezisebenzisa umoya) kwiinkqubo ezizenzekelayo. Uyilo lwe-lug ludla ngokuquka i-ISO 5211 mounting pad ukuze ihambelane ne-actuator.

Uluhlu lobushushu: Kuxhomekeke kwizinto ezisetyenziswa kwisihlalo (umz., i-EPDM: -20°C ukuya kwi-130°C; i-PTFE: ukuya kuthi ga kwi-200°C). Iidiski ze-CF8M zikwazi ukumelana nobushushu obubanzi, ngesiqhelo yi-50°C ukuya kwi-400°C, kuxhomekeke kwinkqubo.

Ukuthobela iMigangatho: Kusenokwenzeka ukuba ilandela imigangatho efana ne-API 598 (uvavanyo), i-ASME B16.34 (uyilo lweevalvu), kunye ne-MSS SP-68 (ukusebenza).